BAJA DESIGN LIGHTING
Installed by experts • Fitment checked • Clean wiring • Quote-based
OPTIONS
PRODUCT OPTIONS
Choose your lighting option below — we’ll confirm fitment for your vehicle and how you use it (work, towing, touring, off-road) and quote it accordingly.
LP4 LIGHTS (LP4 Pro)
Compact 5″ light pod with 8,857 lumens and a huge 200° spread using Integrated Peripheral Technology (IPT). Built-in Direct Ducted Cooling (DDC). Backlight options: amber / red / blue / green.
Key specs:
- Lumens: 8,857
- Wattage: 75.9W
- Amps: 5.5A
- Modes: Beam + Day-time running backlighting
- Backlight options: Amber, Red, Blue, Green
- Beam pattern: Spot
- Lens: Hardcoated polycarbonate (Clear)
- Connector: DT06-4S Deutsch
- Ratings: IP69K • MIL-STD810G • IK10
- Size: 5.1" (H) × 5.1" (L) × 3.2" (D)
- Weight: 2.8 lbs
- Harness: Not included
LP series backlight disclaimer
Disclaimer: Baja Designs LP series lights with red, blue, or green backlights are for EXHIBITION USE ONLY. Never use it on public roads to avoid confusion with law enforcement or emergency vehicles. The owner/driver is responsible for observing all highway equipment laws and safety regulations.
LP6 LIGHTS (LP6 Pro)
6″ powerhouse delivering 11,225 lumens with a 200° usable spread via IPT. High / Low / Day-time running backlighting modes. Direct Ducted Cooling (DDC) for maximum performance. 103W.
Key specs:
- Lumens: 11,225
- Wattage: 103.5W
- Amps: 7.5A
- Modes: High Beam / Low Beam / Day-time running backlighting
- Backlight options: Amber, Red, Blue, Green
- Beam pattern: Spot
- Lens: Hardcoated polycarbonate (Clear)
- Connector: DT06-4S Deutsch
- Ratings: IP69K • MIL-STD810G • IK10
- Size: 6.5" (H) × 6.5" (L) × 3.2" (D)
- Weight: 4.2 lbs
- Harness: Not included
Main description
The LP6 Pro stands as a 6-inch powerhouse, delivering a total of 11,225 lumens and a 200-degree spread of usable LED light through Baja Designs’ Integrated Peripheral Technology (IPT). For optimal performance, the LP6 integrates Direct Ducted Cooling (DDC) technology, allowing efficient air circulation over the rear heat sinks. Featuring colored daytime running light, low power, and high-power modes, the LP6 is built to cover a wide range of off-road lighting needs.
LP 9 LIGHTS (Sport/Pro/Racer.)
8″ flagship light inspired by the La Paz HID. LP9 Pro outputs 12,547 lumens with 200° IPT spread. Day-time running light + low + high modes. Pro backlight options: amber / red / blue / green.
Key specs:
- Lumens: 12,547
- Wattage: 124.2W
- Amps: 9A
- Modes: High Beam / Low Beam / Day-time running backlighting
- Backlight options (Pro only): Amber, Red, Blue, Green
- Beam pattern: Driving/Combo
- Lens: Hardcoated polycarbonate (Clear)
- Connector: DT06-4S Deutsch
- Ratings: IP69K • MIL-STD810G • IK10
- Weight shown: 6.5 lbs (and length shown 6.5 in on one spec image)
- Harness: Not included
LP9 Sport summary & overview
Summary
Lumens: 9,421
Wattage: 88.32W
Function: simple on/off (no hi/lo)
Backlight: no amber backlit feature (that’s on Pro/Racer)
Overview
Sport: 88.32W / 9,421 lumens
Pro: 124.2W / 12,547 lumens
Racer: 132.48W / 8,374 lumens
Backlight options: (Pro only) Amber / Red / Blue / Green
40” ONX6+ LIGHT BAR (40”)
High-output 40” off-road LED light bar with Baja Designs’ High Speed Spot reflector and optional dim (Hi/Low) control. Built for harsh conditions with IP69K waterproofing, IK10 impact rating, and MIL-STD810G testing.
Key specs:
- Lumens: (High) 38,900 / (Low) 32,440
- Wattage: (High) 346W / (Low) 290W
- Amps: (High) 26.8A / (Low) 22.4A
- Modes: High + Low (dimming control available)
- Beam pattern options: Spot / Driving-Combo / Wide Driving
- Lens: Hard Coated Polycarbonate
- Housing: Aircraft Grade Aluminum (Mil-Spec Hard Anodize)
- Ratings: IP69K • IK10 • MIL-STD810G
- Size: 40" x 4.29" x 2.69"
- Harness: Not included (use 640119 for 30–50")
Main description
The Baja Designs OnX6+ 40” LED Light Bar is built for serious off-road lighting with strong long-range performance and wide trail coverage. It uses next-gen LEDs and Baja’s reflector design to light multiple zones ahead of the vehicle. The OnX6+ is race-proven with a mil-spec aluminum housing, hardcoated polycarbonate lens, and is fully sealed using MoistureBlock technology for dustproof and waterproof protection. The bar is also uService friendly, meaning lenses can be replaced or beam patterns can be changed without voiding the warranty.
Harness / wiring info
For OnX6+ light bars in the 30”–50” range, use wiring harness: 640119.
(Recommended for 40” setups.)
50” ONX6+ LIGHT BAR (50”)
Flagship 50” OnX6+ light bar pushing massive output for long-range off-road visibility. Built for durability with MIL-STD810G, IK10, and IP69K waterproofing. Note: 50” OnX6+ is commonly supplied as single-mode (no Hi/Low) and is pre-dimmed.
Key specs:
- Lumens: 39,430
- Wattage: 355W
- Amps: 28.2A
- Modes: Single output (no Hi/Low on 50”)
- Beam pattern options: Spot / Driving-Combo / Wide Driving
- Lens: Hard Coated Polycarbonate
- Housing: Aircraft Grade Aluminum (Mil-Spec Hard Anodize)
- Ratings: IP69K • IK10 • MIL-STD810G
- Size: 50" x 4.29" x 2.69"
- Harness: Not included (use 640119 for 30–50")
Main description
The Baja Designs OnX6+ 50” LED Light Bar is the flagship size for maximum forward lighting and trail visibility. It delivers massive output across multiple zones and is ideal for wide open terrain, high-speed off-road driving, and long-distance illumination. Built to withstand harsh conditions, it features mil-spec aluminum construction, a hardcoated polycarbonate lens, and MoistureBlock sealing for waterproof/dustproof reliability. With uService, lenses can be replaced or the beam can be customized without voiding the warranty.
Harness / wiring info
For OnX6+ light bars in the 30”–50” range, use wiring harness: 640119.
NOTE: The 50” OnX6+ does not have Hi/Low—it is single output and is commonly supplied pre-dimmed.
FITMENT CHECK
CHOOSE YOUR VEHICLE / FITMENT
Lighting fitment depends on your vehicle and how you drive (daily, touring, off-road). Submit your details and we’ll confirm mounting options, wiring requirements, and quote it accordingly.
WHAT’S INCLUDED IN THE INSTALLATION
- Fitment check (vehicle + mounting compatibility)
- Correct mounting hardware
- Wiring / relays / fuses (where relevant)
- Clean cable management
- Setup / aiming
- Test + handover checklist
- Workmanship checked on handover